36
deen
► Rotary knob (4): This is turned to
select and change settings in the dis-
play (e.g. coffee strength or per-cup
quantity).
► Display (5): The display uses symbols
and texts to indicate settings, ongoing
processes and messages.
► Use
(6) to deploy the appliance
automatically out of the built-in unit (see
“Deployment system”).
►
i (7): If you press i (7), informa-
tion is shown on the display (see “Dis-
playing information”). If you keep
i
(7) pressed for longer than 3 seconds,
you open the settings menu (see “Dis-
playing settings”).
► Press start stop (8) to start
drink preparation or to start a service
programme.
Press start stop (8) again during
drink preparation to stop the dispensing
process.
Display messages
The display shows not only the current
operating status, but also various mes-
sages that give you status information or
let you know when you need to take action.
As soon as you have taken the necessary
action, the message disappears and the
menu for drink selection is displayed again.
Information:
Display message Meaning
Water tank
almost empty
Water tank must be
relled soon
Bean container
almost empty
Bean container must
be relled soon
Please wait...
Appliance is working;
please wait a moment
Drink is ready.
You can now remove
your drink
Prompts:
Display message What you need to do
Refill water
tank
Rell water tank
Replace water
tank
Replace water tank
Check water
tank
Remove water tank
and replace correctly
Replace drip
tray
Replace drip tray
Empty drip tray
Empty drip tray and
clean
Refill bean
container
Rell bean container
Set up milk
frother
Set up milk frother
Replace brewing
unit
Close door
Replace brewing unit
and close door
Clean
brewing unit
Clean brewing unit
Service -
change filter
Change water lter
Service -
descale
Run “Descaling”
service programme
Service -
clean
Run “Cleaning”
service programme
Service -
Calc‘n‘Clean
Run “Calc‘n‘Clean”
service programme
Short rinse
for milk system
» Start
Rinse milk system