Siemens TQ507DF03/10 - Basic Settings; Changing the Basic Set- Tings; Overview of the Basic Settings

Basic settings en
55
10.1 Overview of the basic settings
Setting Selection Description
Cleaning and care Milk system
Descale
Clean
calc'nClean
Start service programme.
→"Service pro-
grammes", Page59
Water filter New filter
No filter
Set use of the water fil-
ter.
Coffee temp. normal
high
max.
Set the temperature for
coffee drinks.
Note:The setting is ef-
fective for all preparation
types.
Languages See options on the appli-
ance.
Set menu language.
Changes are immedi-
ately displayed.
Autom. switch-off See options on the appli-
ance.
Set how long the appli-
ance should wait after
preparing the last drink
before automatically
switching itself off.
Water hardness 1 (soft)
2 (medium)
3 (hard)
4 (very hard)
1
Water-softening system
Set the appliance to the
local water hardness.
→"Setting the water
hardness", Page47
Key tones Key tones on
1
Key tones off
Switch the button tones
on or off.
Factory settings Full reset?
Continue: OK
Cancel: ←
Restore settings to the
factory settings.
Note:All individual set-
tings will be deleted and
reset to the factory set-
tings.
1
Factory setting (may vary according to model)
10.2 Changing the basic set-
tings
1. Press
⁠.
2. Use
or to select the de-
sired basic setting and press ⁠.
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.