Siemens TQ507DF03/10 User Manual

Cleaning and servicing en
65
¡ If you accidentally interrupt the ser-
vice programme, you must reset it.
→"Resetting service programmes",
Page65
Tips
¡ If you use a water filter, this pro-
longs the time interval until a ser-
vice programmes needs to be per-
formed.
¡ You can combine the cleaning and
descaling programmes using the
calc'nClean service programme.
→"Using calc'nClean", Page66
¡ Clean your appliance with a soft,
damp cloth immediately after a
service programme to remove any
descaling solution residues and
prevent corrosion.
Resetting service programmes
Perform the following steps if a ser-
vice programme is interrupted, e.g.
due to a power failure.
1. Clean and insert the milk con-
tainer.
2. Rinse out the water tank.
3. Fill the water tank with fresh, non-
carbonated water up to the "max"
marking.
4. Press ⁠.
a The appliance will rinse itself for
approx.2minutes.
5. Empty and clean the drip tray.
6. Insert the drip tray and close the
door.
7. Restart the service programme.
Using the milk system cleaning
programme
Rinse the milk system with water, if
necessary. The rinsing process takes
approx. 1minute.
1. Press ⁠.
2. Use and to select "Clean-
ing and care" and press ⁠.
3. Use and to select "Milk
system" and press ⁠.
4. To start the programme, press ⁠.
a The display will guide you through
theprogramme.
5. Remove and empty the milk con-
tainer.
6. Clean the milk container, milk tube
and suction pipe.
7. Fit the components and insert the
milk container.
8. Place an empty glass under the
outlet system and press ⁠.
The milk system will now clean it-
self automatically.
a The program has ended and the
appliance is ready for operation.
Tip:If you want to clean the milk sys-
tem particularly thoroughly, clean it
regularly by hand.
→"Cleaning the milk system",
Page62
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx.30minutes.
Requirement:The brewing unit is
cleaned.
→"Cleaning brewing unit", Page63
1. Press ⁠.
2. Use and to select "Clean-
ing and care" and press ⁠.
3. Use and to select "De-
scale" and press ⁠.
4. To start the programme, press ⁠.
a The display will guide you through
theprogramme.
5. Empty and insert the drip tray.
6. Remove and empty the milk con-
tainer.
7. Clean the milk container, milk tube
and suction pipe.

Siemens TQ507DF03/10 Specifications

General

Brand	Siemens
Model	TQ507DF03/10
Category	Coffee Maker
Language	English