Siemens TX-I/O TXM1.16D User Manual

s
10562p001
TX-I/O™
Functions and operation
CM110561en_08
2018-10-25
Building Technologies

Siemens TX-I/O TXM1.16D Specifications

General

Product type designation	TXM1.16D
Number of Inputs	16
Digital outputs	0
Input Voltage	24 V DC
Supply voltage	24 V DC
Connection Type	Screw terminals
Protection Class	IP20
Operating Temperature	-25 °C to +55 °C

Summary

Introduction to TX-I/O System

Overview of TX-I/O™ Functions

Summarizes the available functions across different TX-I/O modules.

Indicators and Operator Controls

Local Override Functionality

Fault Messages and Indicators

Lists and explains various fault conditions and their quality values.

Digital Input Functions

Status Indication: Maintained Contact

Status Indication: Pulse Contact

Pushbutton Input Functionality

Multistate Input Maintained Contact (MI Switch)

Explains the function of multistate maintained inputs.

Counting Pulse Contacts

Details the function of pulse counting inputs.

Analog Input Functions

Measurement of Analog Variables

Describes how analog variables like temperature, resistance, voltage, and current are measured.

Digital Output Functions

General Information on Digital Outputs

Maintained Contact: Switchover Output

Maintained Contact: Triac Output

Maintained Contact: Bistable Relay Output

Pulse On/Off Output Function

Pulse Output Function

Multistate Maintained Contact Output

Details multistate maintained contact outputs.

Multistate Pulse Output

Explains multistate pulse outputs.

Three-Position Control Signal Output

Describes three-position control signals for actuators.

PWM Pulse Width Modulation Output

Details PWM output for modulating actuators.

Blinds Control Functionality

Explains the function for controlling blinds.

Analog Output Functions

Proportional Control Signal Output

Table of Parameters (Desigo / CFC Example)