Need help?Do you have a question about the Siemens TX-I/O TXM1.8X-ML and is the answer not in the manual?
Lists and explains potential fault messages and their meanings.
Details the processing of analog variables like temperature, resistance, voltage, and current.
Describes on/off switching using relays.
Explains on/off switching of AC 24 V devices using triacs.
Covers bistable relay operation for maintained contact switching.
Details switching of single-stage loads with on/off pulses.
Explains control and switching of loads using pulses.
Covers control of multispeed motors and multistate loads.
Describes pulse control for multistate loads.
Explains control of three-position actuators without feedback.
General| Product type designation | TXM1.8X-ML |
|---|---|
| Input Voltage | 24 V DC |
| Digital inputs | 8 |
| Digital outputs | 8 |
| Mounting | DIN rail |
| Protection Class | IP20 |
| Connection Type | Screw terminals |
| Type | I/O module |
| Supply voltage | 24 V DC |
| Communication | RS485 |
| Output Voltage | 24 V DC |
| Operating Temperature | -25…+55 °C |
To Next Page