Siemens WL - Page 95

WL Communication-capable Circuit Breaker
2/9
WL Selection and Application Guide • 2005
WL Circuit Breaker
General
WinPM.Net web-enabled
software is a complete energy
information management
solution for your business
allowing you to process, analyze,
store and share energy usage and
power quality data across your
entire enterprise. It offers control
capabilities, comprehensive
power quality and reliability
analysis and can help you reduce
energy-related costs. WinPM.Net
allows you to manage intelligent
metering and protective devices,
analyze data, and decide on new
courses of action. Its cutting-
edge flexibility and compatibility
means you can add one piece at
a time, at your own pace, while
still maintaining your original
investments. Interface to your
existing systems through
industry-standard protocols and
add components as needed. You
can access information from any
desktop workstation, locally or
around the world.
Applications Summary
Power Quality and Reliability
Analysis
Pinpoint the sources of
transients, harmonics, or sags
–whether external or internal to
your facility – and decide on the
best corrective actions. By
monitoring circuits 24 hours a
day, you can develop strategies
to avoid interruptions.
Cost Allocation and Sub-billing
Track energy-related costs by
building, feeder, or tool. Match
virtually any billing structure and
use comprehensive multi-year
scheduling and time-of-use
activity profiles.
Load Studies and Asset
Management
Trend and track power usage
data to take full advantage of
your electrical distribution system
capacity and avoid over-design.
Create usage profiles so you can
distribute loads and avoid
demand peaks.
Demand and Power Factor
Control
Eliminate penalties through
automated power factor
correction, load shedding,
or peak shaving.
Equipment Monitoring and
Control
Meter all your utilities including
gas, steam, air and water. Set up
alarms for pending problems,
pre-alarm on impending or
imminent conditions. Interface
with other energy management
and SCADA systems through
multiple communication
channels and protocols.
Preventive Maintenance
Base your maintenance schedule
on actual operating history.
Supervisory Software WinPM.net
One-Line diagrams
are easy to create for
meaningful visualization of
system and component
status and control
WinPM.Net –customizable
graphics screen depicting
generator status
WL_SA_sec 2-3.qxd 2/7/05 2:20 PM Page 9