Siemens WM N Series - Programme Settings and Options; Adjusting Temperature and Spin Speed Settings; Using the Ready In Delayed Start Feature

en Getting to know the appliance
22
Other information on the display panel
But-
tons
Indicator/
symbol/in-
formation
on the dis-
play panel
Description
( Selectable Tempera-
ture
Ž - Š‹ In °C; Ž = cold
0 Selectable Spin speed
- - -, ‹ -
‚…‹‹**
In rpm; ‹ = no spin
cycle, draining only;
- - - = Rinse Stop
8 Ready in
e.g. ƒ:„‹ Select the program dura-
tion in h:min (hours:min-
utes) after selecting the
program
‚ - ƒ… h End of program ("Ready
in" time) after ...h (hours)
@ Additional program
settings: ~ Page 27
( ¦ speed eco
è Less Ironing*
è Prewash*
è Water Plus/Rinse Plus*
H I Button for starting,
pausing (e.g. to add
more laundry) and can-
celling a program
* Depending on the model
** Depending on the selected program, settings
and model
Indicator/
symbol/in-
formation
on the dis-
play panel
Description
‰** kg Recommended load
Program progress:
“Ÿš Program end
- - - 0 Program end with Rinse
Stop selected
ΠWashing machine door
~ "Adding/removing
laundry" on page 31
~ "Faults and what to do
about them" on page 38
| Tap
~ "Faults and what to do
about them" on page 38
w Childproof lock
~ "Childproof lock"
on page 31
~ "Faults and what to do
about them" on page 38
ä Indicator light for the
Drum clean program*
~ "Information on the
display panel" on page 39
~ "Appliance settings"
on page 33
“: - - Fault code
~ "Information on the
display panel" on page 39
‹ - … Signal setting
~ "Appliance settings"
on page 33
* Depending on the model
** Depending on the selected program, settings
and model
www.devicemanuals.eu/