en Additional programme settings
16
Adding laundry while the preselected
time continues running:
1. Press Start/Reload.
2. The symbols YES and v light up in
the display panel. The washing
machine door can be opened and
laundry can be added.
3. Close the washing machine door.
4. Press the Start/Reload button. The
preselected time continues to run.
\ Additional programme
settings
Additional programme settings
G Speed*
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note: Do not exceed the maximum
load.
Overview of programmes ~ Page 12
¦ Eco*
For saving energy with a washing result
comparable to that of the standard
programme.
Note: The washing temperature is
lower than the selected temperature.
For special hygiene requirements, the
Sensitive programme is recommended.
Ø Anti-crease
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
l Extra Rinse*
Extra rinse. For areas with very soft
water or to further improve the rinsing
result.
z Water plus*
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or to further
improve the rinsing result.
(* depending on model)
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected
(from ~ Page 30).
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the washing machine door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
To Next Page
Loading...
