Siemens WM14E462GB series - Hose and cable lengths

en Positioning and connecting
32
Note: Store the screw and sleeve
screwed together.
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Hose and cable lengths
■ Left-hand connection
■ Right-hand connection
Tip:
The following are available from
specialist dealers/the after-sales
service:
■ Extension for Aqua-Stop and cold
water supply hose (approx. 2.50 m).
Order no. WMZ2380, WZ10130,
Z7070X0
■ A longer supply hose (approx. 2.20
m) for standard model
aFP
aFP
PD[FP
PLQFP
aFP
PLQFP
PD[FP
aFP
aFP
aFP