EasyManua.ls Logo

Siemens WM14UPHSES - Page 56

Siemens WM14UPHSES
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Troubleshooting
56
Fault Cause and troubleshooting
Insufficient cleaning. 3. Clean the dispenser.
4. Refill the dispenser.
→"Filling the dispensers", Page35
HomeConnect is not
working properly.
Different causes are possible.
Go to www.home-connect.com.
No connection to the
home network.
Wi-Fi is switched off.
→"Activating Wi-Fi on the appliance", Page37
Wi-Fi is activated but a connection to your home net-
work cannot be established.
1. Ensure that the home network is available.
2. Reconnect the appliance to the home network.
Water is leaking out at
the water inlet hose.
Water inlet hose is not correctly/securely connected.
1. Connect the water supply hose correctly.
→"Connecting the water inlet hose", Page15
2. Tighten the screw connection.
Water is leaking out at
the water outlet hose.
The water outlet hose is damaged.
Replace the damaged water outlet hose.
Water outlet hose is not connected correctly.
Connect the water outlet hose correctly.
→"Water outlet connection types", Page15
Odours have formed
in the appliance.
Humidity and detergent residue may promote the
formation of bacteria.
→"Cleaning the drum", Page40
If you are not using the appliance, leave the door
and detergent drawer open so that residual water
can evaporate.

Table of Contents

Related product manuals