Siemens WM14UQ9XES - Page 23

Display en
23
Display Designation Description
Water consumption Water consumption for the selected programme.
¡ : Low water consumption
¡ : High water consumption
End signal Basic setting
Button signal Basic setting
Display brightness Basic setting
Reminder to clean the
drum
Flashes: Drum is dirty. Run the limp. tambor pro-
gramme for cleaning and caring for the drum and the
outer tub.
→"Cleaning the drum", Page44
⁠ Voltage control system Flashes: The automatic voltage control system detects
impermissible voltage drops. This will pause the pro-
gramme.
Note:The programme will continue when the voltage
is permissible again.
⁠ Voltage control system Flashes: The programme has been paused because of
impermissible voltage drops. The voltage is permiss-
ible again and the programme will continue.
Note:The programme duration is extended.
Foam detection system The appliance has detected too much foam.
Door ¡ Lights up: The door is locked and cannot be
opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
Tap ¡ No water pressure.
¡ The water pressure is too low.
E:60 / -2B
1
Error Error code, error display, signal.
1
Example