Basic settings en
43
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of the basic settings
Below is an overview of the basic settings on your appliance.
Basic setting Symbol Value Description
End signal 0 (off)
1 (quiet)
2 (medium)
3 (loud)
4 (very loud)
Set the volume of the signal at the end of
the programme.
Button signal 0 (off)
1 (quiet)
2 (medium)
3 (loud)
4 (very loud)
The volume of the audible signal emitted
when the buttons are pressed.
Drum cleaning re-
minder
ON
OFF
Activate or deactivate the reminder to clean
the drum.
Display brightness 1 (low)
2 (medium)
3 (high)
4 (very high)
Set the display brightness.
Changing the basic settings
1. In order to set the basic settings,
press the button.
2. To set the required basic setting,
press the button.
a The display shows the set basic
setting and the current value.
3. To change the value, press / .
4. To exit the basic settings, switch
off the appliance.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Tips on appliance care
Follow the tips for appliance care to
ensure your appliance works cor-
rectly in the long term.
Wipe down the hous-
ing and the control
panel with nothing but
water and a damp
cloth.
The appliance parts
remain clean and hy-
gienic.
To Next Page
Loading...
