Siemens WM14UQ9XES - Basic Operation; Switching on the Appliance; Setting a Programme; Adjusting the Programme Set- Tings

en Basic operation
38
Basic operation
Basic operation
Basic operation
Switching on the appliance
▶
Press .
It may take a few seconds for the
appliance to switch on.
Setting a programme
1. Set the programme selector to the
required "programme" →Page26.
2. If necessary, "adjust the pro-
gramme settings" →Page38.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:Overview of all programme set-
tings:
Requirement:A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Saving the programme set-
tings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:To overwrite the saved pro-
gramme, repeat the steps above.
Loading laundry
Notes
¡ Please read the information in the
"Safety" →Page4 and "Preventing
material damage" →Page11 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
"programme" →Page26.
Requirement:Prepare and sort the
laundry.
→"Laundry", Page34