Siemens WM14VG43 - Resuming the Programme When the Programme Status Is Rinse Hold; Unloading the Laundry; Switching off the Appli- Ance; Childproof Lock

Childproof lock en
35
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Start the Spin programme or se-
lect a suitable programme for
draining.
→"Programmes", Page27
2. Press Start/Nachlegen.
13.13 Unloading the laundry
1. Open the appliance door.
2. Remove the laundry.
13.14 Switching off the appli-
ance
1. Press .
2. Wipe the rubber gasket dry and re-
move any foreign objects.
3. Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
▶
Press and hold the two Kinder-
sicherung 3Sek. buttons for
approx. 3seconds.
a The display shows .
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off.
14.2 Deactivating the child-
proof lock
Requirement:To deactivate the
childproof lock, the appliance must
be switched on.
▶
Press and hold the two Kinder-
sicherung 3Sek. buttons for
approx. 3seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
a goes out in the display.
HomeConnect
15 HomeConnect
HomeConnect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-