Siemens WM14VPH9GB - Page 21

Display en
21
Display Designation Description
-P- Pause Programme status
End End of programme Programme status
Childproof lock ¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is active and the pro-
gramme selector has been adjusted.
→"Deactivating the childproof lock", Page37
Energy consumption Energy consumption for the selected programme.
¡ : Low energy consumption
¡ : High energy consumption
Water consumption Water consumption for the selected programme.
¡ : Low water consumption
¡ : High water consumption
Wi-Fi ¡ Lights up: The appliance is connected to your
home network.
¡ Flashes: The appliance is trying to connect to your
home network.
→"HomeConnect ", Page38
Active oxygen treat-
ment
Active oxygen treatment is activated.
¡ : Normal
¡ : Intensive
and Active oxygen treat-
ment
A programme with active oxygen treatment has been
interrupted and the door is locked until the active oxy-
gen is no longer present in the drum.
Note:It may take up to 25 minutes until there is no
longer any active oxygen in the drum
Foam detection system The appliance has detected too much foam.
→"Error code / Fault display / Signal", Page51
Door The door is unlocked and can be opened.
Tap ¡ No water pressure.
→"Error code / Fault display / Signal", Page51
¡ The water pressure is too low.
E:60 / -2B
1
Error Error code, error display, signal.
→"Error code / Fault display / Signal", Page51
1
Example