Siemens WM14VPH9GB - Buttons

en Buttons
22
Buttons
Buttons
Below is an overview of the buttons and their setting options.
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→"Programmes", Page24.
Button Selection Description
Start/ Reload ¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the programme.
varioSpeed ¡ Activate
¡ Deactivate
Activate or deactivate a short washing pro-
gramme.
Note:Energy consumption increases.
The washing result is not affected by this.
Intensity Intensity Select the intensity of the active oxygen treat-
ment:
Use the normal power intensity level for light
odours.
Use the intensive level for strong odours, e.g. ci-
garette or kitchen smells.
Active oxygen is a special type of oxygen which
effectively reduces odours.
- Ready In + 1–24 hours Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Temperature – 90 °C Adjust the temperature in °C.
Spin Speed 0 – 1400 rpm Adjust the spin speed or deactivate the spin
cycle.
If 0 is selected, the water is drained and the spin
cycle is deactivated at the end of the washing
cycle. The laundry stays wet inside the drum.
(mains switch) ¡ Switch on
¡ Switch off
Switch the appliance on or off.