Siemens WM14VPH9GB - Page 49

Cleaning and servicing en
49
3. Connect the water inlet hose and
check for leaks.
Cleaning the filter on the
appliance
Note:Please read the safety informa-
tion →Page4 to ensure that you use
the appliance safely.
Requirement:The water inlet hose is
empty.
→"Emptying the water inlet hose",
Page48
1. Disconnect the hose from the rear
of the appliance.
1
2
2. Use pliers to remove the filter.
3. Clean the filter with a small brush.
4. Reinsert the filter.
5. Connect the hose and check for
leaks.