Siemens WM16XKH2ES - Resuming the Programme When the Programme Status Is Rinse Hold; Unloading the Laundry; Switching off the Appli- Ance; Childproof Lock

Childproof lock en
33
– If the water level is high, start
the programme or select a
suitable programme for draining.
→"Programmes", Page26
3.
Remove the laundry →Page33.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Start the programme or select a
suitable programme for draining.
→"Programmes", Page26
2. Press inicio/pausa+carga.
13.11 Unloading the laundry
1. Open the appliance door.
2. Remove the laundry.
13.12 Switching off the appli-
ance
1. Press .
2. Wipe the rubber gasket dry and re-
move any foreign objects.
3. Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.
Childproof lock
14 Childproof lock
Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
▶
Press and hold the two ⁠3s.
buttons for approx. 3seconds.
a The display shows .
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off.
14.2 Deactivating the child-
proof lock
Requirement:To deactivate the
childproof lock, the appliance must
be switched on.
▶
Press and hold the two ⁠3s.
buttons for approx. 3seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
a goes out in the display.