Siemens WMH4Y890GB - Resetting Your Network Settings

en Home Connect
54
Resetting your network
settings
You can clear the network settings and
break the connection to your
smartphone or tablet PC by resetting
the network settings.
1. Switch the appliance on.
2. Press and hold the Remote start }
button for more than three seconds.
Aut. network log-in appears in the
display panel.
3. Use either of the left-hand arrow
buttons to select Network settings.
4. Use either of the right-hand arrow
buttons to select Reset.
5. Use either of the right-hand arrow
buttons to select Continue.
The network settings are now reset.
Your appliance is no longer connected
to your home network or the
Home Connect app.
6. You can exit the Home Connect
settings by selecting the
Remote start } button.
Note: If you want to operate the
appliance via the Home Connect app
again, you must reconnect it to your
home network and to the
Home Connect app either automatically
or manually.
QLFKWYHUEXQGHQ
+DXSWPHQ
1HWZRUNVHWWLQJV 5HWDLQ
:L)LRQRII
6RIWZDUHXSGDWH
5HVHW
YHUELQGHQ
+DXSWPHQ
1HWZRUNVHWWLQJV
:L)LRQRII
6RIWZDUHXSGDWH 5HWDLQ
5HVHW