EasyManua.ls Logo

Siemens WU12UT61ES - Detergents and Care; Products; Basic Operation; Switching on the Appliance

Siemens WU12UT61ES
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detergents and care products en
29
Brush sand out of all collars and
pockets
Close bed covers and cushion
covers
Close all zips, Velcro fasteners,
hooks and eyes
Tie cloth belts, apron strings,
etc. together or use a laundry
bag.
Tie together longer drawstrings,
and tie cords with solid end-
pieces in hoods or trousers
Remove curtain hooks and lead
strips or use a mesh laundry
bag
Use a mesh laundry bag for
small items of laundry, such as
children's socks
Some stubborn or dried-in stains
can be removed by washing
several times
Wash large and small items of
laundry together
Do not rub fresh stains but dab
them with soapy water
Separate items of laundry and
shake them out, or observe the
programme description
12 Detergents and care
products
Notes
¡ You can find further information in
the digital instruction manual by
scanning the QR code in the table
of contents or on siemens-
home.bsh-group.com .
¡ Observe the information on safety
→Page4 and preventing material
damage →Page10.
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ Only use liquid detergents that are
self-flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use bleaching agents in the
appliance
operation
13 Basic operation
operation
Note:You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on siemens-home.bsh-
group.com .
13.1 Switching on the appli-
ance
Requirement:The appliance has
been correctly installed and connec-
ted.
→"Installation and connection",
Page12
Turn the programme selector to a
programme.
Note:The lighting for the drum goes
out automatically.
13.2 Setting a programme
1. Turn the programme selector and
set the required programme.
→"Programmes", Page24
2. If required, adjust the programme
settings.
→"Adjusting the programme set-
tings", Page30

Table of Contents

Related product manuals