Getting to know your appliance en
11
Control panel
###+ K
3
;C
Note: All buttons are sensitive, they only need to be touched gently.
( Switch on and off the appliance.
Press the # main switch button.
0 Select a programme. Rotating the
programme selector in either direction is
possible. Programme Overview, refer to
~ Page 19
Change programme settings of the
selected programme and select
programme options:
8 Select °C (Temp.), 0 (Spin), 5
(Finish in) buttons and change.
@ Select ecoPerfect ¦,
speedPerfect Gor Rinse Plus buttons.
H Select Stains button for stain
selection. Overview of all stains
~ Page 24
P Select + Options button for
additional programme options. Overview
of all options ~ Page 24
X Start wash programme. Select
Start/Reload button to start, interrupt
and cancel the programme (e.g. reload
washing).
` Change appliance settings. Hold
down Settings 3 sec. button for
appliance settings (end signal, button
signal, auto power-off, language) for
approx. 3 seconds. See Overview of all
settings ~ Page 25
h Display panel for settings and
information.
To Next Page
Loading...
