Sierra Designs Clip Flashlight 2

To Next Page

STEP 1: Find an even

piece of ground; be sure

the area is clear of

debris. Lay out your tent

as shown. Stake the 4

corners (circled).

STEP 2: Assemble poles.

Insert long pole into

grommets at front of tent

and short pole into

grommets at rear of tent.

Congratulations on the purchase of your new Sierra Designs tent! In order to familiarize yourself with your new tent, we recommend

you “test pitch” it before embarking on your wilderness adventure.

PACKAGE INCLUDES: Tent Body, Rain Fly, 2 Poles, 4 Guy Cords, 9 Hex Peg Stakes, 1 Pole bag with attached stake bag.

STEP 3: Connect Tent Lite Hook to poles.

STEP 5: Connect the velcro loops on the underside of the ﬂy

to the rear and front hoop poles. (6 total)

STEP 6: Attach grommets/webbing on the sides of the

ﬂy to the pole tips; adjust the tension locks. Stake out

the vestibule and rear. Admire your new tent!

Clip Flashlight 2 / Light Year 1

PITCHING INSTRUCTIONS

SR Buckle

Tent Lite Hook

Long Pole

Short Pole

Velcro Loop

Tension Lock

STEP 4: Lay the rain ﬂy over the tent connecting the side-release

(SR) buckles at the rear of the tent. NOTE: clip the gray male SR

buckle to the gray female SR buckle and yellow to yellow to

ensure ﬂy is put on correctly.

Need help?

Do you have a question about the Sierra Designs Clip Flashlight 2 and is the answer not in the manual?

Summary

PITCHING INSTRUCTIONS

Prepare Site and Stake Corners

Find clear, level ground; lay out tent and stake the four corners.

Assemble and Insert Poles

Insert long pole into front grommets and short pole into rear grommets.

Connect Tent Lite Hook

Connect the Tent Lite Hook to the tent poles.

Attach Rain Fly

Lay fly over tent and connect SR buckles, matching colors.

Secure Fly to Poles with Velcro

Connect underside fly velcro loops to front and rear hoop poles.

Final Fly Attachment and Tensioning

Attach fly grommets to pole tips, adjust tension, stake vestibule.

USING YOUR TENT

Guying Out Your Tent

Secure tent with guylines and stakes for stability, especially in wind.

Open Awning Setup

Configure vestibule for awning coverage using guylines and trekking poles.

String Locks

Adjust stake out tension using corner locks by lifting tab or pulling cord.