Sierra Designs FLASHLIGHT 2 User Manual

FLASHLIGHT 2
(STANDARD, UL & FL MODELS)
PITCHING INSTRUCTIONS
PACKAGE INCLUDES: Tent body with attached Rain Fly, 1 NR Joint Rear Pole, 2 Vertical Poles, Guy Cords, Stakes, 1 Pole/Stake Bag and Tent Stuff Sack.
NOTE: If you’re carrying trekking poles and want to
drop 6oz of weight, leave the vertical poles at home.
Simply insert the handle end of the pole into the
awning peak and put the trekking pole tip into the
grommet.
STEP 2: Assemble rear pole and insert in grommets.
Attach the two H-Clips on the tent to NR Joint on pole.
Attach ultralight clip to pole.
STEP 1: Find an even piece of ground; be sure area
is clear of debris. Layout your tent as shown. Stake
the 4 corners (circled).
STEP 3: Assemble vertical poles. Insert the rounded
end of the pole into the sleeve located under the
awning at the peak of the tent. Insert the bottom of
the pole into the grommet.
STEP 4: Now that the vertical pole is installed, stake
out the gear closet. It works best if the gear closet
wall is attached to the tent body as shown. Repeat
steps 3 & 4 on the other side of the tent.
STEP 5: Stake out the rear vent on tent (circled) and
your tent should be completely set up.
NR Joint with H-Clip
must face down.
Congratulations on the purchase of you new Sierra Designs tent! In order to familiarize yourself with
your new tent, we recommend you “test pitch” it before embarking on your wilderness adventure.

Sierra Designs FLASHLIGHT 2 Specifications

General

Brand	Sierra Designs
Model	FLASHLIGHT 2
Category	Tent
Language	English

Summary

Tent Pitching Instructions

Site Selection and Initial Anchoring

Find an even, clear ground area and stake the tent's four corners securely.

Rear Pole Assembly and Attachment

Assemble the rear pole and attach the tent's H-clips to the NR Joint on the pole.

Vertical Pole Installation

Insert vertical poles into the tent sleeve at the peak and secure the bottom into the grommet.

Gear Closet and Second Side Setup

Stake out the gear closet and repeat pole installation on the other side of the tent.

Final Tent Stakeout

Stake out the rear vent on the tent to complete the setup process.

Trekking Pole Alternative

Utilize trekking poles as a substitute for vertical poles to save weight.

Using Your Tent Features

Ventilation and Visibility Control

Adjust the waterproof door to control interior visibility and ventilation during rain.

LineLoc Tension Adjustment

Learn how to adjust stake-out point tension using the LineLoc system by lifting the tab.

Guy Line Setup

Properly tie and stake out guy lines using the provided loops and Line-LOK for stability.

Gear Storage Options

Store gear outside the doorway for protection or clip back for greater ventilation.