Sierra Wireless airlink es440 Quick Start Guide

AirLink
®
ES440 Quick Start Guide
Page 1
STEP 2 Connect the Device
This guide provides instructions for quickly getting your Sierra Wireless
®
ES440 device congured and connected.
For more information refer to the:
• AirLink ES440 User Guide
• ALEOS
™
Conguration User Guide
Both are available for download from the Sierra Wireless web site (www.sierrawireless.com/Support/Downloads).
1 Remove the four screws attaching the grey cover to the device’s body.
2 Slide the SIM card into the SIM card holder.
Note the location of the notched corner for correct alignment.
3 Replace the cover.
1 Connect the primary RF
antenna.
2 Connect the secondary RF
antenna.
4 Optional: Connect the RS‑232 port to the router console port using a null
modem converter / cable.
3a AceManager conguration:
Connect a Windows
®
computer to the
device with an Ethernet cable.
3b AirVantage conguration:
Connect the router port performing
ISP failover to the ES440 device’s
Ethernet port.
5 Connect the power cable to the device.
The device starts automatically, as indicated by the ashing LEDs.
STEP 1 Install the SIM Card
© 2013 Sierra Wireless All Rights Reserved PN 2400000 Rev. 1
NOTE: If you want to congure all your devices at the same time using AirVantage
®
Management Service, follow the instructions on page 2 to
register your devices before applying power.

Sierra Wireless airlink es440 Specifications

General

Model	AirLink ES440
Category	Gateway
Serial Ports	1 x RS-232
GPS	Yes
Operating Temperature	-30°C to +70°C
Cellular Bands	LTE Band 2, 4, 5, 12, 13, 17, 25
Power Supply/Input Voltage	9-30 VDC