Need help?Do you have a question about the Sierra Wireless AirPrime and is the answer not in the manual?
General| Brand | Sierra Wireless |
|---|---|
| Model | AirPrime |
| Category | GPS |
| Language | English |
Lists the operating system and software prerequisites for the GNSS Tool.
Instructions for installing necessary drivers for device connection.
Describes the primary graphical user interface of the GNSS Tool.
Steps to configure the COM port and baud rate for device connection.
Explains the functions accessible via the file menu and toolbar.
Details on how to establish and terminate a connection with the module.
Guides on capturing NMEA data logs from the GNSS module.
Instructions for reviewing previously recorded NMEA data logs.
How to use the RTCM client for streaming correction data.
Procedures for updating the GNSS module firmware.
How to check the current firmware version of the GNSS module.
Steps to obtain and download Assisted GNSS (AGNSS) files.
Accessing and viewing data from the device's DR sensor.
Capturing debug logs for troubleshooting purposes.
Utilizing the Ephemeris Runtime Flash Saving feature for faster TTFF.
Performing cold, warm, or hot restarts on the GNSS module.
Displaying GNSS location data within Google Earth.
How to properly close the GNSS Tool application.
Viewing sent and received commands and data in a list.
Displaying and analyzing NMEA sentences received from the module.
Monitoring Carrier-to-Noise ratio for satellite signals.
Visualizing satellite positions and signal reception in a sky plot.
Analyzing GNSS performance metrics through various charts.
Calculating Circular Error Probable for position accuracy.
Displaying detailed data for each GNSS satellite.
Efficiently sending commands and querying the GNSS module.
Viewing raw measurement data from GNSS satellites.
Performing Time To First Fix tests for GNSS module performance.
Customizing the layout and arrangement of application windows.
Manually selecting the GNSS module model for the tool.
To Next Page