SIFCO ASC TechnoPlate Power Pack 6015A20V User Manual

SIFCOTechnoPlate Power Pack_2019-05-06_V1.5_e.doc 1/68
Strictly confidential! No unauthorized circulation of content.
© All rights reserved by plating electronic GmbH. Modification and reproduction only by authorized persons!
Documentation type: Operating manual
Author: J. Schumann
Last modification by: Johannes Schumann Print date: 2019-06-28
Last saving date: 2019-06-28
Last modification: ..\History_SIFCO TechnoPlate_001.xlsx V1.5
Comment:
plating electronic GmbH - Rheinstraße 4 - D-79350 Sexau - Germany
Tel.: +49 (0)7641 / 93500-0 - Fax.: +49 (0) 7641 / 93500-999 E-Mail: info@plating.de
Operating Manual for
SIFCO ASC TechnoPlate Power Pack
with detachable control unit
Read this operating manual completely before installation.
Not following installation and operation procedures will void the warranty. It also
could result in serious injury or death.

SIFCO ASC TechnoPlate Power Pack 6015A20V Specifications

General

Brand	SIFCO
Model	ASC TechnoPlate Power Pack 6015A20V
Category	Power Supply
Language	English

Summary

General Security Information

Essential Safety Precautions

Critical safety warnings and precautions for safe operation.

Module Installation Guidelines

Procedures for installing DC power supply modules, including connector handling.

Permissible Operation Conditions

Unit Components and Connections

DC Output Connection Guide

Proper method for connecting loads to the unit's DC output terminals, including polarity checks.

RS485 BUS Interface

Core Operation and Control Features

Software Function Overview

Summary of the main control functions available via the device's software interface.

Advanced Control and Adjustment

Ampere-Hour Counter Management

Using the Ampere-Hour counter for alarm output and auto-switch-off.

Potentiometer Control Functions

How potentiometers control output values and step functions.

Voltage and Current Adjustment

Detailed method for adjusting voltage and current using digital potentiometers.

Step Function Operation

Utilizing the step function to recall and manage preset parameters.

Preset Value Management

Adjusting Set Values

System Settings and Configuration

Key Settings Functions

BUS Interface Configuration

Preset Counter Configuration

Settings for direction, setpoint, alarm time, and switch-off behavior of the preset counter.

Pole Changer Settings

Overload Detection Setup

Configuring overload detection thresholds and response modes.

Technical Data and Specifications

General Specifications Overview

Model-Specific Specifications

Detailed electrical and operational parameters for each SIFCO TechnoPlate model.

Calibration, Service, and Support

Voltage Output Calibration

Current Output Calibration

Recommended Maintenance Tasks