SIFCO ASC TechnoPlate Power Pack 6030A20V - User Manual

SIFCOTechnoPlate Power Pack_2019-05-06_V1.5_e.doc 1/68
Strictly confidential! No unauthorized circulation of content.
© All rights reserved by plating electronic GmbH. Modification and reproduction only by authorized persons!
Documentation type: Operating manual
Author: J. Schumann
Last modification by: Johannes Schumann Print date: 2019-06-28
Last saving date: 2019-06-28
Last modification: ..\History_SIFCO TechnoPlate_001.xlsx V1.5
Comment:
plating electronic GmbH - Rheinstraße 4 - D-79350 Sexau - Germany
Tel.: +49 (0)7641 / 93500-0 - Fax.: +49 (0) 7641 / 93500-999 E-Mail: info@plating.de
Operating Manual for
SIFCO ASC TechnoPlate Power Pack
with detachable control unit
Read this operating manual completely before installation.
Not following installation and operation procedures will void the warranty. It also
could result in serious injury or death.

Summary

SIFCO TechnoPlate Power Pack Operating Manual

EU Declaration of Conformity

General Safety Information

Device Classification and Warnings

Class-A device status and critical safety precautions for operation.

Installation and Operation Safety

Guidelines for safe installation, operation, and environmental conditions.

Detachable Control Unit

DC Output Connection

Connection Procedures and Safety

How to correctly connect the DC output to the load, including polarity and safety.

RS485 BUS Interface

Mains Supply Connection

Single-Phase Connections

Three-Phase Connections

Basic Operation

Main Switch and Powering On

How to turn the DC power supply unit on and off using the main switch.

Software Functions

Ampere-Hour Counter

Preset Value Setting

Reset Functionality

Potentiometer Control

Voltage and Current Adjustment

How digital potentiometers control voltage and current settings.

Step Function Operation

Step Function Overview

Purpose and general operation of the step function for recalling presets.

Step Navigation and Management

Adjusting Set Values

System Settings Menu

Settings Menu Options

RS485 BUS Configuration

How to configure the RS485 BUS interface settings.

Preset Counter Configuration

Detailed configuration options for the preset counter.

Pole Changer Settings

How to configure the pole changer modes, timings, and alarms.

Overload Detection Setup

Setting the voltage drop threshold for overload detection.

Technical Data

Model-Specific Specifications

Detailed specifications for various SIFCO TechnoPlate Power Pack models.

Calibration Procedures

Voltage Calibration

Step-by-step guide to calibrate the voltage output.

Current Calibration

Step-by-step guide to calibrate the current output.

Service and Maintenance

SIFCO ASC TechnoPlate Power Pack 6030A20V Specifications