SIFCO ASC TechnoPlate Power Pack 6060A20V

Need help?

Do you have a question about the SIFCO ASC TechnoPlate Power Pack 6060A20V and is the answer not in the manual?

Summary

General Safety Information

Critical Safety Warnings and Precautions

Highlights essential safety instructions, including live voltage, casing, qualified personnel, and cable handling.

Installation and Operation Conditions

DC Power Supply Module Installation

Operating Environment Requirements

Specifies the necessary environmental conditions for safe and proper operation of the power supply.

Specific Device Models: 15 A;20 V and 30 A;20 V

DC Output Connection Procedures

Connecting DC Output Terminals

Guides on connecting the load to the DC output, checking polarity, and using appropriate cables.

RS485 BUS Interface Connection

BUS Connection Scheme

Details the pinout and connection scheme for RS485 BUS input and output sockets.

Mains Power Supply Connections

Single-Phase Device Power Input

Details the power input socket and connecting scheme for single-phase devices.

Single-Phase Power Cord Plug

Illustrates the procedure for inserting and locking the single-phase power cord plug.

Three-Phase Device Power Input

Shows the connection scheme and procedure for the three-phase power cord plug.

Mains Cable Specifications

Specifies standards for supply cables and external fuses, and wiring best practices.

Device Operation Basics

Main Power Switch Function

Software Control Functions

Function Overview Summary

Manual Pole Changer Operation

Pole Changer Audio and Visual Indicators

Ampere-Hour Counter and Reset

Setting the Ampere-Hour Preset Value

Guides on setting the preset value for alarm output and auto-switch-off.

A;H Reset Functionality

Explains the direct reset function of the ampere-hour counter using the A/H RESET key.

Potentiometer and Step Functionality

Digital Potentiometer Functions

General Operation Start-up

Potentiometer Control Modes

Control Function Overview

Counting Adjustment Mode

Jumping Digit Selection Mode

Counting and Jumping Mode

Digit Reset Functionality

Step Functionality for Preset Recall

Step Function Parameters

Lists the parameters included in a step preset, such as voltage, current, and labeling.

General Step Operation

Step and NEXT STEP Key Operations

Navigating Between Steps

Storing and Resetting Step Values

STORE Key Functions

STEP RESET Key Functions

LABEL Key for Step Naming

Step Labeling Procedure

Creating a New Preset at STEP 1

Setting Voltage and Current for STEP 1

Instructions on setting voltage and current values and polarity for a new preset.

System Settings and Configuration

Main Menu Navigation

Accessing the SETTINGS Menu

RS485 BUS Interface Configuration

Guides on setting up the RS485 BUS interface, including mode and baudrate.

Preset Counter Configuration

Covers setting direction, setpoint, alarm time, and switch-off functions for the preset counter.

Pole Changer Settings

Details configuration options for the pole changer, including mode, time settings, and alarm.

Overload Detection Setup

Guides on configuring overload detection thresholds and understanding overload behavior.

STEP Menu and Labeling

Technical Specifications

General Specifications Overview

Individual Model Specifications

Details specific electrical and performance data for each TechnoPlate model variant.

Calibration Procedures

Voltage Calibration Guide

Step-by-step instructions for calibrating the DC output voltage using external instruments.

Current Calibration Guide

Measurement setup and procedure for calibrating the DC output current.

Service and Maintenance Recommendations

Regular Maintenance Tasks