39
MUZZLE VELOCITY (MV) CALIBRATION
The most important input for calculating accurate Applied Ballistics solutions is getting your
MV correct. You need to either chronograph your rearm or use the embedded MV Calibration
routine built into the BDX
®
App. To use the MV Calibration routine make sure your scope is
zeroed (i.e. at 100 yards) and verify that the BDX App is showing zero holdover values at the
zero distance by ranging the target at the zero range and verifying that your holds are in fact zero
Use the MV Calibration routine at the
farthest distance you intend to shoot.
The greater the distance the more
accurate the MV calculation will be. In
this example the target was at 378 yards.
Conrm your max target range.
Note – BDX-U only provides ballistic
solutions out to 800 yards maximum.
To Next Page
Loading...
