SIG KADET LT-40 - User Manual

Sig Mfg. Co., Inc...401
-
7 S Front St ...PO Box 520....Montezuma IA 50171
-
0520
Welcome to the sport of Radio Control flying, and thank you for choosing the SIG KADET LT-40.
We understand how anxious you are to get started building and flying your KADET LT-40, but please take a few minutes right
now to study the full-size plans while you page through these instructions. This will familiarize you with the general layout of the
airplane and the building sequence, making the entire project easier in the long run.
Introduction
In order for your KADET LT-40 to fly as well as it was designed to, it must be carefully assembled. A model airplane that is not
built properly will not fly properly! Remember to work slowly and follow the instructions exactly. SIG, as the kit manufacturer, can
provide you with a proven aerodynamic design, quality materials, and detailed instructions, but ultimately the flyability of your
finished model depends on how well YOU put it all together.
Customer Service
SIG Mfg. Co., Inc. is totally committed to your success in building and flying the KADET LT-40. Should you encounter any
problem building this kit, or find any missing or damaged parts, feel free to contact us by mail or phone.
SIG MFG. CO., INC.
401-7 S Front St
P.O. Box 520
Montezuma, IA 50171-0520
SIG MODELER
’
S HOTLINE: 1
-
641
-
623
-
0215 Weekdays, 7:00am
-
4:30pm Central

Summary

Introduction and Kit Overview

Introduction and Customer Service

Overview of the model, building process, and manufacturer support.

Kit Parts List and Disclaimers

Detailed list of kit components and manufacturer's liability disclaimer.

Preparation and Identification

Guidance on wood parts, essential tools, and using the plans.

Wing Construction

Wing Panel Construction

Step-by-step instructions for building the left and right wing panels.

Joining Wing Panels and Ailerons

Assembling wing halves, installing ailerons, and reinforcing the center joint.

Completing the Wing

Final wing assembly steps, including servo mount and stiffeners.

Fuselage and Tail Assembly

Fuselage Construction

Step-by-step guide for assembling the main fuselage structure.

Tail Surfaces Construction

Building the stabilizer, elevator, fin, and rudder components.

System Installation and Covering

Covering the Model

Guidance on applying covering material, fuel proofing, and decals.

Installing Radio and Controls

Mounting servos, engine, and connecting control linkages.

Fuel Tank Installation

Installing and connecting the fuel tank and lines.

Final Assembly and Flight Preparation

Final Assembly

Joining major components like wing, fuselage, and tail surfaces.

Balancing the Airplane

Determining and adjusting the Center of Gravity for proper flight.

Learning to Fly RC

Tips and recommendations for beginners learning to fly RC aircraft.

SIG KADET LT-40 Specifications

General

Brand	SIG
Model	KADET LT-40
Category	Toy
Language	English