7 S Front St ...PO Box 520....Montezuma IA 50171
Welcome to the sport of Radio Control flying, and thank you for choosing the SIG KADET LT-40.
We understand how anxious you are to get started building and flying your KADET LT-40, but please take a few minutes right
now to study the full-size plans while you page through these instructions. This will familiarize you with the general layout of the
airplane and the building sequence, making the entire project easier in the long run.
In order for your KADET LT-40 to fly as well as it was designed to, it must be carefully assembled. A model airplane that is not
built properly will not fly properly! Remember to work slowly and follow the instructions exactly. SIG, as the kit manufacturer, can
provide you with a proven aerodynamic design, quality materials, and detailed instructions, but ultimately the flyability of your
finished model depends on how well YOU put it all together.
SIG Mfg. Co., Inc. is totally committed to your success in building and flying the KADET LT-40. Should you encounter any
problem building this kit, or find any missing or damaged parts, feel free to contact us by mail or phone.
SIG MFG. CO., INC.
401-7 S Front St
P.O. Box 520
Montezuma, IA 50171-0520
To Next Page
Need help?
General