SIG RASCAL 110 EG ARF

To Next Page

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520

www.sigmfg.com

KIT NO.: SIGRC84EGVARFB - (White / Trans Blue)

SIGRC84EGVARFR - (White / Trans Red)

SPECIFICATIONS:

Wing Span: 110 in. (2794 mm)

Wing Area: 1522 sq. in. (98.2 dm

)

Length: 75.75 in. (1924 mm)

Flying Weight: 11 - 13 lbs. (4990 - 5897 g)

Wing Loading: 17 - 20 oz./sq.ft. (51 - 60 g/dm

)

Glow Power: 2-Stroke 1.2 - 1.5 cu. in. (20 - 25 cc)

4-Stroke 1.2 - 1.8 cu. in. (20 - 30 cc)

Gas Power: 1.2 - 1.8 cu.in. (20 - 30 cc)

Electric Power: 1600 - 2600 watt (200-270 kv) Brushless Motor;

80-120A ESC; 8S-12S Lipo Battery Pack

Radio Required: for Glow or Gas:

5-Channel with 7 Heavy-Duty Servos

Ail(2), Elev(1), Rud(1), Thro(1), Flaps(2)

for Electric:

5-Channel with 6 Heavy-Duty Servos

Ail(2), Elev(1), Rud(1), Flaps(2)

Main Page

Need help?

Do you have a question about the SIG RASCAL 110 EG ARF and is the answer not in the manual?

Summary

Model Specifications

Required Purchase Items

Power System Options

Details recommended glow, gas, and electric power systems for the Rascal 110 EG.

Radio System Setup and Requirements

Flaps Decision and Servo Details

Covers flap decisions, channels, servo types, power-specific needs, and extension cords.

Important Operational Notes

Wing Assembly

Installing Aileron and Flap Servos

Aileron Control Horns and Pushrods

Flap Control Horns and Pushrods

Fuselage Assembly

Tail Surface and Tailwheel Installation

Guides mounting the stabilizer, fin, rudder, and tailwheel assembly to the fuselage.

Rudder Servo and Pull-Pull Cables

Instructions for installing the rudder servo and setting up the pull-pull cable system.

Elevator Servo and Pushrod Installation

Steps for installing the elevator servo and connecting its pushrod to the elevator control horn.

Landing Gear Assembly and Installation

Glow and Gas Engine Installation

Thrust Line Considerations

Explains the importance of correct right and down thrust angles for engine mounting.

Engine Mounting Guidelines

Provides guidelines and examples for mounting typical glow and gas engines, including distance and thrust.

Electric Motor Installation

Motor Mount Assembly

Instructions for assembling the plywood motor mount and preparing it for motor attachment.

Firewall Adjustment and Mounting

Guidance on adjusting the firewall position for correct motor shaft distance and securing it.

Motor Mount to Firewall Attachment

Steps for attaching the plywood motor mount to the firewall using bolts and blind nuts.

Motor Mount Reinforcement

Motor and ESC Connections

Instructions for connecting the motor wires to the ESC and mounting the ESC.

Battery Tray Installation

Mounting the Cowling

Cooling Considerations

Complete Radio Installation

Wing Strut Installation

Pre-Flight Checks

Balancing the Model

Crucial steps for achieving the correct center of gravity (CG) for safe and stable flight.

Control Surface Travel Adjustments

Guidance on adjusting pushrod linkages and transmitter EPA for proper control surface movement.

Flying the Rascal 110

Pre-Flight Procedures

Takeoff and Climb Procedures

Landing Approach

Advice on landing approaches, considering the glider's glide ratio and flap usage.

Safety Warning: Not a Toy!