SYSSA 30cc GAS ENGINE
The SYSSA 30 is a popular gasoline engine for the RASCAL
because it does not stick out the sides of the cowling. Pillar
mount can be customized to provide the 6 in. distance from the
firewall to the prop washer. Bottom of cowling is opened up for
cylinder head and exhaust pipes.
Syssa Aircraft Performance - www.syssaaircraft.net
F.P.E. 1.3 (21cc) SINGLE-CYLINDER GAS ENGINE
This gasoline e
ngine has its own integral mount. Plywood
spacers are required to achieve the design distance of 6 in. from
the firewall to the prop washer. Carburetor sticks out of right
side of cowling. Bottom of cowling opened up for cylinder head
and good cooling.
First Place Engines - www.fpengines.com
Skip this section if your using a glow or gas engine.
This kit does include a laser-cut plywood universal m
otor mount
that will work for almost all brushless motors that will likely be
used in the RASCAL 110. For that reason, we will go through
step-by-step instructions on how to use the included mount.
The mount assumes that your brushless electric motor includes
a typical "X" or "cross" style mounting plate on the back of the
motor.
For the following steps you will need:
(1) Fiberglass Cowling
(6) M3 x 10mm S
crews
17
ELECTRIC MOTOR INSTALLATION
To Next Page
Loading...
