SIGCUS SGC 49B - LOCK; Password Management; System Lock and Input Block

to select the “Lock” menu. And press “ ENTER” to enter the sub-menu.
LOCK
Pr
ess the “MENU” button to enter the OSD menu .Then press “ee/f” button
1. Press “d” button to select “Enter Passwor
d” and press select digital button to enter.
Note: The default password is “0000”
2.
Press  /  b
u
tt
on
t
o
selec
t “Change Password”, then press
“ENTER/f”
butt
o
n
to
ad
jus
t
the va
lue.
If
the password is changed, all of the passwords in the menu will be changed at the same time.
Note
: If you f
orget your
password, you can use “1470”
to enter any menu locked.
3.
Press
“c/d” button
to select “System Lock”
and press the “e/f”
button to select “On” or
“Off”.
4. Press  /  bu
tton to
select “Input Block”, then press
“ENTER/f”
button to enter
sub-m
enu.
a.
Press “c/d” button to select “TV” and press the “e/f” button to select “Block”
or “Unblock”.
b.
Press “c/d” button to select “A
V” and press the “e/f” button to select “Block”
or “Unblock”.
16
Return
Return
Return
Return
Return
Return