EasyManua.ls Logo

SIGCUS SGC 49B - Introduction; Installation Guide

SIGCUS SGC 49B
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Thank you for purchasing SIGCUS FHD LED Television. To get the most out of your
Intr
oduction
INST
ALLATION
Locate
the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow
enough space between the receiver and the wall to permit ventilation.
A
void excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
This
TV can be connected to AC 100-240V~ 50/60HZ.
Do
not install the TV in a location near heat sources such as radiators, air ducts,
direct sunlight, or in closed compartments and closed areas.
Do not cover the ventilation openings when using the TV.
The indicator light will last for about 30 seconds after the power has been turned
off.
Wait until the indicator light goes out before repowering the TV.
new purchase, it is highly recommended that you read this manual before starting the
operation.
3