Before consulting service personne
l, check the following chart for
possible solutions.
PROBLEM
SOLUTION
TV will not turn on
ƔMake sure the power cord is plugged in. ƔThe batteries
in the remote control may be
Exha
usted; replace
the
batteries
.
No pi
cture, no sound
ƔCheck the cable between TV and antenna/
external AV
device.
ƔPress the power button on the remote. ƔPress the
SOURCE button
the remote, then press the “Ÿ/ź”button
repeatedly to select the TV source.
Poor picture, s
ound OK
ƔCheck the cable between TV and antenna/
exte
rnal AV
device.
ƔTry a
nother channel, the station may have
broadcast difficulties. ƔAdjust the brightness/contrast in
the Video menu.
Check t
hat the unit is set to NTSC
Audi
o noise ƔMove any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of
sub pixels which requires sophisticated
technology to produce. However, there may be
a sm
all number of
bright or
dark pixels on the
screen. These pixels will have no impact on the performance of the product.
23
To Next Page
Loading...