SIGLENT SDG2082X User Manual

SIGLENT
102 SDG2000X User Manual
Press Utility → Test/Cal → TouchCal, to enter the following interface.
Figure 2-62 Touch Adjust Interface
According to the message, click the red circle on the upper left corner, upper
right corner, lower left corner and lower right corner of the screen in sequence.
After touch calibration is done, the system will display the following tip. Then
press any key or touch the screen to exit the current interface.
Figure 2-63 Touch Adjust Done

SIGLENT SDG2082X Specifications

General

Brand	SIGLENT
Model	SDG2082X
Category	Inverter
Language	English