SIGLENT SDG2042X Service Manual

SDG2000X Service Manual I
SDG2000X Series
Function/Arbitrary Waveform Generator
Service Manual
SM0202X-E01B

SIGLENT SDG2042X Specifications

General

Brand	SIGLENT
Model	SDG2042X
Category	Inverter
Language	English

Summary

General Safety Summary

Chapter 1 Specifications

The SDG2000X Series Generator at a Glance

Chapter 2 Quick Start

To Prepare the Generator for Use

Lists accessories supplied with the instrument and provides initial setup guidance.

To Set the Output Frequency

To Set the Output Amplitude

To Set the DC Offset

To Set the Duty Cycle of a Square Waveform

To Set the Symmetry of a Ramp Waveform

To Generate a Pulse Waveform

To Generate a Noise Waveform

To Set the DC Voltage

To Output a Built-In Arbitrary Waveform

Chapter 3 Performance Verification

DC Output Verification

Tests the DC offset accuracy using a DMM against specified ranges.

AC Amplitude Verification

Verifies AC amplitude output accuracy at 10 kHz using a DMM.

Frequency Response Verification

Checks amplitude flatness across frequencies using a Power Meter.

Chapter 4 Assembly Procedures

Disassembly Procedures

Chapter 5 Troubleshooting

Board Diagrams for Troubleshooting

Power Supply Diagnostics

Procedures to test the generator's power supply by checking output voltages.

Channel Board Diagnostics

Includes voltage testing, clock source, FPGA, and connector checks for the channel board.

Main Board Diagnostics

Includes voltage testing, clock checking, ARM CPU, and connector checks for the main board.

General Failure Troubleshooting Guide

Provides steps to identify causes of common hardware failures in the instrument.

Chapter 6 Maintenance