To Next PageTo Next Page
Need help?Do you have a question about the Sigma BC 1606L and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Water Resistance | Yes |
| Mounting Type | Handlebar mount |
| Type | Wired |
| Backlight | No |
| Total Time | Yes |
| Battery Type | CR2032 |
| Functions | Current speed, trip distance, clock |
| Speed Measurement Range | 0 - 99.9 km/h |
Step-by-step guide for installing the bike computer on the bicycle.
Explains how to switch between modes and reset functions using buttons.
How to cycle through different data screens using MODE buttons.
Instructions for turning the display backlight on and off.
Guide to setting language, units, time, and other initial parameters.
Instructions for setting up the computer for a second bike with WS 2.
Steps to choose the desired language for the device interface.
How to switch between kilometers per hour and miles per hour.
Procedure to input wheel size for the first bicycle.
Procedure to input wheel size for the second bicycle.
Guide to determine and input wheel size using charts or calculation.
Instructions for setting the current time, including 12/24 hour format.
How to enable or disable the display of cadence (pedaling) frequency.
Procedure for entering cumulative distance and time for bikes.
Guide to setting the display contrast for better readability.
Instructions on how to start, stop, reset, and use the stopwatch.
How to set the countdown or count-up timer and its functions.
Instructions for setting and using the kilometer counter.
Explanation of icons indicating speed differences relative to average speed.
How to reset displayed data, either individually or completely.
Table detailing technical data, default values, and units.
Information on battery type, replacement, and polarity.
Solutions for common problems like display, speed, or cadence issues.
Details on warranty coverage and how to contact customer support.
