Need help?Do you have a question about the Sigma BCN3D and is the answer not in the manual?
General| Extruder | Independent Dual Extruder (IDEX) |
|---|---|
| Nozzle Temperature | Up to 300°C |
| Layer Resolution | 0.05 - 0.3 mm |
| Nozzle Diameter | 0.4 mm (standard), other sizes available |
| Connectivity | Ethernet, Wi-Fi |
| Supported Materials | PLA, ABS, PETG, TPU, Nylon, PVA, Composites |
| Technology | Fused Deposition Modeling (FDM) |
Provides essential safety guidelines for operating the printer, including handling hot parts and materials.
Guides through the initial welcome, setup assistant, and material selection processes.
Instructions for loading filament and repeating the process for the second extruder.
Details on initial printer calibration, including bed leveling and adjusting calibration screws.
Guides through Z, X, and Y axis calibration steps and line alignment checks.
Explains how the printer performs a test print to validate calibration and select alignment.
Guides through opening Cura, adding the BCN3D Sigma machine, and initial configuration.
Steps to load model files for each extruder and merge them for dual extrusion.
Instructions for selecting print profiles and saving the GCode file to an SD card.
Steps to select the print job on the printer's display and start the printing process.
To Next Page
