77
US/GB
6 CALIBRATION AND CORRECTION FACTOR
6.4.1 PREPARING FOR CALIBRATION
1 Put on the chest belt or attach the HipClip.
2 Go to a measured distance of at least 800 meters.
Tip: The inside lane of a track is 400 meters.
3 Select “Calibration” in the setting mode.
4 Press the SET button. The running computer detects whether
you are wearing the HipClip or the chest belt. The function “Running”
is displayed.
Tip: If you want to calibrate the RC 14.11 for walking,
select the function “Walking” with the SPEED (+) button.
5 Press the SET button. Instructions for what you have to do are
shown on the running computer’s display.
To Next Page
Loading...