SETTING THE ELECTRONIC SOUND
This camera will inform you with an Electronic Sound “Pi-Pi”, when the camera
confirms focus. It is possible to cancel this electronic sound, if you desire.
1
Press the “FUNC” button 2 times (Press and
hold the button at 2
nd
time). The LCD panel will
indicate
mark.
2
Press the and hold the “FUNC” button and turn
the “C”-dial, to select “on” for choosing “beep”
sound. If you want to cancel this electronic
sound then choose “ - - ”.
TIP
· When the Mark is indicated on the LCD panel, Electronic Sound is on. If
there is no mark indicated on the LCD panel, the Electronic Sound is off.
· When you set the self-timer mode or use remote control, the electronic sound
cannot be erased.
36
To Next Page
Loading...
