Sigma SD9 - Magnifying Images (Zoomed-In View)

MAGNIFYING IMAGES
(ZOOMED-IN VIEW)
To view image detail or check focus, recorded images can be magnified up to 5
levels, depending on the resolution of the image.
TO MAGNIFY IMAGE
Press
＜ ＞
on the
＋
/
−
Controller from
Single-Image View.
While in Zoomed-in View:
Press
＜ ＞
on the
＋
/
−
Controller to increase magnification. Maximum
magnification is 400%.
Press
＜ ＞
on the
＋
/
−
Controller to decrease magnification.
Press the
＜ ／ ／

／

＞
arrows on the 4-way controller to pan around the
image.
Press
＜


CANCEL
＞
to return to Single-Image View.
TIP
· While in Zoomed-In View, the 4-way controller cannot be used to change
images. Press
＜

CANCEL
＞
to get out of Zoomed-In View, or return to
Single-Image View by pressing
＜ ＞
on the
＋
/
−
Controller, then use the
4-way controller to change the image selection.
69