What to do if Sigma TAURO 35 Mixer doesn't start when pressing the START button?
If your Sigma Mixer doesn't start when you press the START button, it could be due to a couple of reasons. First, check if the protection grid is open; if so, rotate it and reposition it in the closed position. Second, there might be an issue with the safety micro switches, in which case you should replace the micro switch.
Why does the bowl of my Sigma TAURO 35 not rotate smoothly?
If the bowl of your Sigma Mixer isn't rotating smoothly, it's likely due to: 1. A loose chain, in which case you should tension the chain. 2. A worn chain, in which case you'll need to replace the chain.
Why is the spiral of my Sigma TAURO 35 Mixer not rotating smoothly?
If the spiral on your Sigma Mixer isn't rotating smoothly, it could be due to: 1. A loose chain or belt. To resolve this, tension the chain or belt. 2. A worn belt, which would require replacing the belt.
What to do if the indicator light on my Sigma TAURO 35 doesn't turn on?
If the indicator light doesn't come on when you turn the master switch to position 1, the issue might be that the plug is not inserted properly, or its wires are detached. Check the connection to resolve this.
Machine features safety devices like master switch, circuit breaker, and guards for operator protection.
Identifies hazards like gripping, dragging, crushing, shearing, and electrocution during operation.
Critical guidelines for safe and correct electrical connection by a qualified technician.
Guide on loading ingredients, mixing, and unloading dough, including safety precautions.
Guide to common anomalies, causes, and recommended repair procedures.
To Next Page
General
