SIGMATEK C-IPC 171 - Applicable Connectors and Cables

C-DIAS IPC WITH AMD FUSION G-T56N C-IPC 171
04.11.2019 Page 13
3.2 Applicable Connectors
COM1/COM2: 10-pin Weidmüller plug B2L3, 5/10
CAN/ DIAS bus: 6-pin Weidmüller connector plug B2L3, 5/6
USB: Type A
Ethernet: 8-pin RJ 45
Video: 10-pin RM 2.54
Power: 2-pin Phoenix FK-MCP 1.5/2-ST-3.5
USV: 6-pin Phoenix FK-MCP 1.5/6-ST-3.5
The complete C-DIAS CKL 012 connector set with spring terminals is available from
SIGMATEK under the article number 12-600-012.
S-DVI Cable
0.3 m
2 m
3 m
3.5
5 m
7 m
10 m
15 m
Art.No.: 05-950-003
Art.No.: 05-950-020
Art.No.: 05-950-030
Art.No.: 05-950-035
Art.No.: 05-950-050
Art.No.: 05-950-070
Art.No.: 05-950-100
Art.No.: 05-950-150
NOTE:
Connecting the S-DVI cable under voltage can damage the S-DVI interface; it is not
hot-plug capable.