SIGMATEK C-IPC 171 - Bottom Connector Details

C-IPC 171 C-DIAS IPC WITH AMD FUSION G-T56N
Page 14 04.11.2019
3.3 Bottom Connectors
X12 C-DIAS Bus Connector
16 1
c
b
a
X13 DIAS Bus Connector
1
14
CAUTION!
To connect the DIAS module to X13 of the C-IPC, a DIAS power module (power booster)
between the C-IPC and DIAS module is required. The measure is necessary to protect the
C-IPC from EMC-noise and to unburden the DCDC converter in the C-IPC (reducing power
loss in the C-IPC).
Pin
Function
1
GND
2
MBUS+
3
MBUS-
4
GND
5
SBUS+
6
SBUS-
7
GND
8
DCOK
9 – 13:
+5 V
14
GND
Connection to the C-
IPC (X13)
Connection to the 1st
DIAS module
DPB 002
05-002-002l