Need help?Do you have a question about the SIGNAL FIRE AI-9 and is the answer not in the manual?
General| Category | Fusion Splicer |
|---|---|
| Fiber Alignment | Core Alignment |
| Cutting Length | 8-16mm |
| Interface | USB |
| Communication Interface | USB |
| Applicable Fibers | SM, MM, DS, NZDS |
| Splice Loss | 0.02dB (SM) |
| Return Loss | >60dB |
| Typical Splice Time | 9 seconds |
| Fiber Diameter | 80-150μm |
| Power Supply | AC 100-240V |
| Monitor Fiber View | 4.3 inch LCD |
| Operating Condition | -10°C to 50°C |
| Storage Condition | Humidity: 0-95%, Temperature: -20℃~+75℃ |
To Next Page
