Need help?Do you have a question about the SIGNAL FIRE AI-9 and is the answer not in the manual?
General| Category | Fusion Splicer |
|---|---|
| Fiber Alignment | Core Alignment |
| Cutting Length | 8-16mm |
| Interface | USB |
| Communication Interface | USB |
| Applicable Fibers | SM, MM, DS, NZDS |
| Splice Loss | 0.02dB (SM) |
| Return Loss | >60dB |
| Typical Splice Time | 9 seconds |
| Fiber Diameter | 80-150μm |
| Power Supply | AC 100-240V |
| Monitor Fiber View | 4.3 inch LCD |
| Operating Condition | -10°C to 50°C |
| Storage Condition | Humidity: 0-95%, Temperature: -20℃~+75℃ |
Describes the main function of the AI-9 device.
Details on operating environment and power requirements for the fusion splicer.
Output characteristics and voltage requirements for the AC/DC power adapter.
Safety precautions and handling instructions for the internal lithium-ion battery.
Overview of the fusion splicer's main functions and physical components.
Details on combined functions of operation keys for daily maintenance.
Details on the normal splicing mode for the machine.
Procedure for pausing and resuming the splicing process.
Explanation of the automatic focusing feature during splicing.
Procedure for calibrating the ARC discharge for optimal splicing.
Information on the smart lock feature for machine management.
How to continue the splicing process after a pause.
Explains intelligent prompts and solutions for various fiber state issues.
Troubleshooting foreign matter or fog on the lens impacting identification.
Instructions for downloading the mobile application via QR code or app stores.
Steps to enable Bluetooth permissions on iOS and Android phones.
Purpose of the smart lock feature for managing splicer usage and rentals.
Step-by-step guide for performing ARC calibration on the fusion splicer.
Instructions on how to cleave different types of optical fibers.
Guidelines for correctly inserting optical fibers into the holder.
Step-by-step guide for replacing the electrodes of the fusion splicer.
Instructions for activating new or replaced electrodes using the Signalfire2 app.
Settings for optical power meter and VFL module.
Steps for connecting to the app and configuring power meter/VFL settings.
Importance of keeping the fusion splicer clean and free from dust.
Procedure for cleaning the V-groove to ensure proper fiber holding.
How to clean and replace the fusion splicer's electrodes.
Troubleshooting and cleaning dirty objective lenses for clear viewing.
Precautions against shock/vibration and guidelines for storage.
General safety precautions during operation and maintenance.
Features for night lighting and charging mobile phones using the device.
To Next Page
