Signature Control Systems, Inc. EZ Pro Jr. 8300 Series User Manual

1 2 3 4 5 6
Part No.: 99903327
Revision No.: A
Date: July 2014
EZ PRO
™
Jr. Instructions Zone Chart
Frequently Asked Questions
Please read before calling Customer Service.
Q. A.
Does your system run repeatedly?
Do NOT set a start time for every zone. Only ONE start time is necessary if the system needs to run one time a day.
Q. A.
How do I delete a start time? Set the Start Time at 12:00. With the 12 blinking, touch the ADJUST one time.
Q. A.
Where do I leave the LARGE dial?
Leave the dial on TIME.
7 8 9
10 11 12
Remove
Here

Signature Control Systems, Inc. EZ Pro Jr. 8300 Series Specifications

General

Brand	Signature Control Systems, Inc.
Model	EZ Pro Jr. 8300 Series
Category	Controller
Language	English

Summary

Installation Instructions

Wiring the Transformer

Details on wiring the transformer for different EZ Pro™ Jr. models and general notes.

Terminal Strip and Connections

Information on the terminal strip, master valve/pump relay, and rain/moisture sensor connections.

Connecting Batteries and Starting Controller

Programming Instructions

Programming Overview

General guidelines and principles for programming the EZ Pro™ Jr. controller.

Front Panel Layout

Description of the controller's front panel buttons, dial, and LCD display.

Set Time of Day

Set Today's Date and Current Day

Select Zones and Set Run Times

Steps to assign run times to specific zones within a program.

Set Start Times

How to set up to three start times for each program.

Set % Water Budget

Adjusting watering duration by a percentage for weather changes.

Set Watering Schedule

Overview of scheduling options: Water Days, Odd/Even, Interval, and Event Days.

Set Water Days Scheduling Option

Set Odd/Even Day Scheduling Option

Set Interval Scheduling Option

Set Master Valve or Pump Delay

Auto Mode Functions

Set the Rain Sensor Bypass

Instructions to bypass the rain sensor, allowing watering even when tripped.

Run a Zone Manually

How to manually run a specific zone for a set duration.

Run a Program Cycle Manually

Troubleshooting and Service

Troubleshooting Symptoms and Solutions

Common issues, their possible causes, and recommended solutions for the controller.