4 5
TABLE OF CONTENTS
Features 5
Installation 6-10
Terminal Strip 9
Connecting Master Valve or Pump-Start Relay 9
Connecting Rain/Moisture Sensor 9
Connecting Battery & Starting Controller 10
Programming the EZ Pro
™
Jr. 11-21
Programming Overview 11
Front Panel Layout 12-13
Set Time of Day 14
Set Today's Date 14
Set Current Day 14
Select Zones and Set Their Run Times 14
Set Start Times 15
Set % Water Budget 15-16
Set % Water Budget by Month 16
Scheduling 16-17
Set Water Days Scheduling Option 17
Set Odd/Even Day Scheduling Option 18
Set Interval Scheduling Option 18
Set Event Day Scheduling Option 19
Program Review 19
Set Master Valve or Pump 20
Set Rain Delay 20
Turning the Controller Off 21
Advanced Features 22-23
Run a Zone Manually 22
Run a Program Cycle Manually 23
Technical Data/Specifications 24-26
Troubleshooting/Service 27
FCC Rules 28
FEATURES
• Lithium battery back-up stores programs without AC or
Battery power (AA)
• Programmable delay between zones
• Three independent programs
• Three start times per program (9 total starts)
• Stacking start times
• Three scheduling options to suit the needs of plant material or to
comply with watering restrictions (days of the week, 1-30 day
interval, true odd/even)
• Event days programming per program
• Rain Sensor bypass option
• Leap year compatible-automatically includes Feb 29th every
four years
• Water budget option reduces or increases watering 0-200 percent
• Advanced water budget to set water budget for each month
of the year
• Two test cycles (Manual with ManualAdvance feature and Cycle)
• Programmable run times from one minute to 1 hour 59 minutes
• Poly-fuse self resetting circuit protection
To Next Page
Loading...